White Color Dimmable Motion Sensor IP20 Rating TUV RED Certificated
Dimming microwave sensor with 220-240V operating voltage to keep the brightness of 10% or 20% even no movement detected-HD01V
Features:
- Dimming sensor with operating voltage of 220-240V.
- With 12 DIP switch keys to offer more options of Hold time, stand-by period, stand-by dimming level.
- Could keep the light on with a lower brightness like 10%,20% and the like when no movement detect to meet the special requirements in some special occasions.
- Automatically turn on the light to be 100% brightness when detect the movement with an insufficient daylight.
- 6 pole pluggable clamp terminal (L,N,N,L’, 1-10V+,1-10V-) for 0.75-1.5mm² cable.
- It’s flexible to control the detection range With four options(10%,50%,75%,100%) which make it very widely used in the parking lot to lower the sensitivity of light to avoid false trigger.
- IP20 and 5 years of warranty.
- Certificate of TUV/RED/CE/RoHs.
Specifications:
| Input | Operating Voltage | 220-240VAC 50/60Hz | |
| Stand-by Power | ≤1W | |
| Output | Switching Capacity | Max.400W(Controlgear)Max.800W(Incandescent lamp) | |
| Sensor Parameters | Hold Time | 5s/90s/5min/15min | |
| Detection area | 10% / 50% / 75% / 100% | |
| Daylight Threshold | 2Lux/10Lux/50Lux/Disable | |
| Mounting Height | Max.6m(ceiling mounted); Max.3m(wall mounted) | |
| Detection Range | Max.14m(ceiling mounted); Max.10m(wall mounted) | |
| Wireless Parameters | Frequency | 5.8 GHz ±75 MHz |
| Switch Control | 0N/0FF |
| Operating Environment | Temperature | -20℃~+55℃ |
| Detection Angle | 30°-150° |
| Certificate | Certificate | TUV/RED/CE |
| Others | Wiring Method | 6-pole terminal (Input L/N. Output N/L’/V+/V-) |
| IP Rating | IP20 (Built-in) |
| Installation Size | 103*45*31mm |
| Packaging | Bubble bag +Outer Carton(K=A) |
| Life | 50000h |
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
Dimensions:
Small design & basic Micorwave Motion Sensor for easily installation and widely using in the smart lighting control industry.
Wiring Diagram:
6 pole pluggable clamp terminal (L,N,N,L’, 1-10V+,1-10V-) to make it happen to be easily connected with the power supply and LED Driver.
With the terminal of V+/V- to be able to provide 1-10V dimming signal to LED Driver to control the brightness of LED light finally.
Detection coverage:
Max. detection range will be 14m for ceiling mounted; Max. Detection range will be 10m for wall mounted.
Dip switching settings:
Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level
In this area, The period of Definition of the the period of light The
movement will light keeping ambient brightness; keeping low output definition of
be detected 100% brightness only when the before it's completely low output
and able to after moving ambient brightness switched off.when it's in the
trigger the objects levea is lower than the preset as"∞",the light stand-by period.
sensor. 100% the detection preset specific always keep at low
detection area area. lux amount,the output if no movement
is also known sensor will work; in the detection area
as the strong when it's preset and doesn't turn OFF.
sensitivity. as"disable",the
sensor works
everytime it
detects motion
regardless the
ambient brightness.
Detection Area (Sensitivity)
| | 1 | 2 | |
| Ⅰ | ON | ON | 100% |
| Ⅱ | ON | - | 75% |
| Ⅲ | - | ON | 50% |
| Ⅳ | - | - | 10% |
Hold Time
| | 3 | 4 | 5 | |
| Ⅰ | ON | ON | ON | 5S |
| Ⅱ | - | ON | ON | 30S |
| Ⅲ | ON | ON | - | 1min |
| Ⅳ | - | - | OM | 5min |
| V | - | ON | - | 10min |
| VI | ON | - | - | 20min |
| VII | - | - | - | 30min |
Daylight Threshold
| | 6 | 7 | |
| Ⅰ | ON | ON | Disable* |
| Ⅱ | ON | - | 50Lux |
| III | - | ON | 10Lux |
| Ⅳ | - | - | 2Lux |
*Disable means the daylight sensor does not work.
The sensor will turn on light once motion is detected regardless of ambient light level.
Stand-by Period
| | 8 | 9 | 10 | |
| Ⅰ | ON | ON | ON | 0S |
| Ⅱ | - | ON | ON | 10S |
| Ⅲ | ON | ON | - | 1min |
| Ⅳ | - | - | OM | 10min |
| V | - | ON | - | 30min |
| VI | ON | - | - | 60min |
| VII | - | - | - | ∞ |
Stand-by dimming level
| | 1 | 2 | |
| Ⅰ | ON | ON | 100% |
| Ⅱ | ON | - | 75% |
| Ⅲ | - | ON | 50% |
| Ⅳ | - | - | 10% |
HD01V.pdf
Product Tags:
|
|
White Color Dimmable Motion Sensor IP20 Rating TUV RED Certificated Images
|
